• Mini Spray Dryer Manufacturers, Mini Spray Dryer Factory, Supply Mini Spray Dryer
Mini Spray Dryer

Small spray drying machine is suitable for the colleges and universities, research institutes and food medicine, chemical industry laboratory trace particles of powder production, such as emulsion, suspending liquid has a broad spectrum of all solution applicability, suitable for drying thermal sensitivity material such as biological products, biological pesticide, enzymes, because of overflowing material only when sprayed into mist particle size under high temperature, so just instant heating, can maintain the active material in dry hind still maintain its active ingredients are not destroyed.

Main features of small spray dryer

1. Original import nozzle, high efficiency.

2. Color LCD touch screen parameters display: inlet temperature/outlet temperature/peristaltic pump speed/air volume/needle frequency.

3. Automatic control: start the machine with one button, after setting the spray process parameters, the peristaltic pump will start automatically when the temperature reaches the predetermined temperature, and the operation animation will be displayed on the touch screen, and the operation process will be clearly displayed. Just press the stop button to shut down the machine automatically and safely.

4.Manual control: if the process parameters need to be adjusted during the experiment, it can be easily switched to manual state. The color touch screen dynamic display (animation) of the whole experiment process

5.A nozzle cleaner (cleaning needle) is equipped to remove the nozzle when it is blocked. The frequency of cleaning needle can be adjusted automatically.

6.Shutdown protection function: when shutdown, just press the stop button, and the machine will stop immediately except the fan, so as to ensure that the heating part will not be burnt out due to the wrong operation (forcing the fan off).

7.The spray, drying and collecting system is made of transparent high quality borosilicate heat-resistant glass material, which enables the drying process to be carried out in a pollution-free environment.

8.It is equipped with imported oil-free air compressor with normally distributed diameter, good fluidity and low noise, less than 60db.

9.The atomization structure of fluid spray, the whole machine is made of high quality stainless steel, the design is compact, no need of accessory equipment.

10.To keep the sample clean, an inlet filter is provided. The feeding quantity can be adjusted by the feeding peristaltic pump, and the minimum sample quantity can reach 50ml. After drying the finished dry powder, its particle size is more uniform, more than 95% of dry powder in the same particle size range. For sticky materials, there is a nozzle cleaner (cleaning needle).  When the nozzle is blocked, it will be cleaned automatically. The frequency of cleaning needle can be adjusted automatically. Innovative tower wall purge device, higher material recovery.

1.Product moisture content is too high
Exhaust air temperature is the main factor affecting the moisture content of finished products, so the reason for the high moisture content of products is generally the exhaust air temperature is too low. And the exhaust air temperature can be adjusted by the amount of feed. Therefore, the corresponding measures are appropriate to reduce the amount of feed, in order to improve the exhaust temperat...more
Product Tag:
Get the latest price? We'll respond as soon as possible(within 12 hours)
close left right