• Experimental Spray Dryer Manufacturers, Experimental Spray Dryer Factory, Supply Experimental Spray Dryer
Experimental Spray Dryer

Experimental spray dryer is one of the most widely applicable drying equipment, at the same time to ensure high efficiency and high quality, in addition, experimental spray dryer can also be used for many different types of materials, such as activated carbon, glucose, aluminum sulfate, etc., experimental spray dryer can be dedicated to its work. Experimental spray dryer adopts high temperature and rapid drying technology, with short drying time, special dispersing device arranged in the machine to remove large amount of water, quickly disperse and break up materials, no sticky wall, coking phenomenon.

The hot air temperature of experimental spray dryer or drying medium temperature is the most sensitive tube jacking condition in drying. The higher the temperature of the hot wind, the more heat energy it contains, and the lower the relative humidity of the hot wind, the stronger the ability to absorb and carry water, which is very conducive to drying, and the drying thermal efficiency is also very high. In many drying equipment, when other conditions remain unchanged, the dewatering capacity of experimental spray dryer is basically proportional to the change of hot air temperature. In the selection of drying equipment, it is necessary to have sufficient data on the limit temperature of damaged materials, in the case of materials allowed, try to choose high temperature media. In particular, it should be noted that many drying methods, especially rapid drying, the material temperature after drying is much lower than the temperature of the drying medium, for example, the experimental spray dryer hot air temperature is more than 250℃, and the discharge temperature is generally below 60℃.

Experimental spray dryer operation, dynamic, continuous, fast, product quality uniformity, system operation stability, and energy saving, consumption reduction, no pollution, in a variety of alumina drying, as well as light metal industry products will be more widely used. There are many choices in material selection, compared with other types of dryer has some advantages, of course, compared with experimental spray dryer in a certain field still has some shortcomings, but for the current industry is also a very good product.


Company Style
Factory Tour
FAQ
1.Product moisture content is too high
Exhaust air temperature is the main factor affecting the moisture content of finished products, so the reason for the high moisture content of products is generally the exhaust air temperature is too low. And the exhaust air temperature can be adjusted by the amount of feed. Therefore, the corresponding measures are appropriate to reduce the amount of feed, in order to improve the exhaust temperat...more
Get the latest price? We'll respond as soon as possible(within 12 hours)
close left right